Operational Instructions - York Fitness Active 100 Exercise Cycle 53066 Owner's Manual

Operational instructions

Console:
Power On:
When power on, the LCD monitor will beep and display all segments.
Stand-by Mode:
The LCD monitor will enter stand-by mode after 4 minutes of inactivity.
Press on any key to wake the monitor.
Operation:
• Press and hold the MODE or RESET button for 3 seconds, the LCD monitor will beep and
display all segments.
• If the workout begin without any pre-set value for any functions, the computer will begin
displaying the count up value for each of the function in sequence.
The LCD monitor will enter stand-by mode after 4 minutes of inactivity.
10 www.yorkfitness.com
SCAN TIME SPEED DISTANCE CALORIE
RESET UP
MODE DOWN