Vimtag VT-361 User Manual page 34

VIMTAG IP CAMERA VT-361 SECURITY CAMERA
camera and want to revert all of them. In addition, you can restart your camera
from this screen.
• Others - In this section, you will be able to control the speaker volume on the
camera, as well as the microphone. You also have the option to ip the picture on
the camera here - helpful if you had to install the camera upside down. Addition -
ally, you can choose between 50Hz and 60Hz frequency, based on your country.
Once you make your changes, you will click apply.
As you can see, the controls and settings are very similar to the version you will
nd on your computer. The differences are very slight, and the majority of the
information applies to both. The same holds true for the Android app, which we
will discuss next.
made your changes, tap on apply to keep the changes.
• SD Card - When you have an SD card installed in the
camera, its status and capacity will appear in this section.
You will be able to enable or disable the case, check the
status, capacity, usage, and available space. You can also
format, repair, and uninstall the SD card from this section.
• Alert Device - In this section, you are able to adjust the
motion sensitivity for the camera with an easy to use slid -
er. Sliding to the left makes it more sensitive, while sliding
to the right makes it less sensitive. In addition, this section
has options for input and output for additional devices
you might have attached to your camera. Most people
will not need to use anything except the motion sensitivity
slider in this section.
• Alarm Action - This section will allow you to choose what
needs to occur when an alarm is triggered via the alarm
device or motion detection.
• Date/Time - You can set the day and time manually on
this screen, or you can synchronize it with a timeserver.
• Scheduled Recording - On this screen, you will be able
to schedule up to four different recording sessions.
• System - Under this page, you can see whether there is
an online upgrade needed for your camera software. You
can also choose to restore the factory settings, which could
be helpful if you have made a number of changes to the
34