Connecting The Camera - Vimtag VT-361 User Manual

Hide thumbs Also See for VT-361:
Table of Contents

Advertisement

Photosensitive
Sensor
Microphone
Wireless
Network
Status Light
loudspeaker
DC5V Power
Port
Ethernet
THE BOTTOM
Now, let's look at the front bottom portion of the camera. At the center, you will
nd the Power LED. When this is lit up, it lets you know that the camera is on. To
the left of this LED is wireless Network Status Light, and to the right is wired Network
Status Light
THE BACK
On the back of the camera, starting at the left, you will see the DC5V Power Port,
which you will use to connect to a power source. Next is the Ethernet interface,
followed by the eternal input/output interface. Then comes the SD slot for your
SD card (32GB recommended), and the audio input/output interface. The back
also features the FN composite button, and the WI-FI antenna.
Now that you know where all of the different features are located on the camera,
it's time to connect it.
ETHERNET
If you are going to be running the camera through a wired connection, you will
simply connect an Ethernet cable from the Ethernet interface to your router. It will
then show up on your network. You can go to the Vimtag site and add the camera
to get it started.
WI-FI
Those who are going to connect through WI-FI will be able to nd the camera on
their network once they hook it up and turn it on. Again, they will be able to add
the camera to their list at the Vimtag site.
VIMTAG IP CAMERA VT-361 SECURITY CAMERA
Lens
IR LED
POWER LED
Wired Network
Status Light
FN Button
Antenna
Audio Input
/Output
IN
OUT
Micro SD Card Slot
External Input
/Output

CONNECTING THE CAMERA

THE TOP
On the front of the camera, at the top, you
will see the photosensitive sensor, which
surrounds the lens. Just below the lens is
the IRL (infrared light), which allows you to
lm video even in the darkness. Right be -
low this is the microphone, which will pick
up sound from inside of the room that con-
tains the camera.
Located on the side of the camera toward
the top is the loudspeaker. If someone is
speaking on the other end of the connec-
tion, his or her voice will come from this
loudspeaker.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents