Vimtag VT-361 User Manual page 30

After you've signed into the system, click on the three lined icon in the top right
of the screen. This will bring up a number of options, including noti cation center set
password, and check APP soffware version ,clear cache. and exit.
We'll come back to these settings later.
Since you are setting up your rst camera, you will want to click on "+".
A screen will pop up that will allow you to enter the camera device ID number
and password. Once you have entered the information, click on the Add button.
Now, you will see all of your available cameras. They will have a green dot in the
left corner to indicate that they are online. If the dot is red, it indicates they are
of ine. You can follow the same instructions we went over in the previous chapter
to troubleshoot any cameras that are of ine. To enter a full screen view of the
camera, simply tap on the video.
WORKING WITH THE SYSTEM
which will have a line through it when it is not in op -
eration. By tapping this icon, the line will disappear,
and you will be able to listen to what is happening
in the room with the camera, as the camera's micro -
phone will pick up the sound.
To speak through the microphone on your phone,
and through the camera's loudspeaker, you can tap
the Microphone icon. The line that is on it will disap -
pear, and then you can start speaking.
If you want to take and save a photo of something
that's happening on the screen now, simply tap the
Snapshot icon, which looks like a camera.
VIMTAG IP CAMERA VT-361 SECURITY CAMERA
You will nd that the control scheme is very similar to that
on PC. However, there are a few notable differences when
it comes to the placement of icons and how you will per -
form certain functions. We will go over all of those here.
Along the bottom of the screen, you will see several icons,
which will be familiar if you've read the previous chapter.
They include:
• Sound/Speaker
• Call/Microphone
• Snapshot
• Record
• Gears
The Sound icon is a speaker,
30