Vimtag VT-361 User Manual page 37

you add the nickname, remember to tap on apply.
• Admin Password - Here, you can modify the admin password for this particular
camera. This could be different from your regular login password for the account.
To change the password enter your old password, the new password, con rm the
new password, and then click apply. Those who have admin login status are able
to modify information on the camera.
• Guest Password - Add or change a guest password for the camera. You will
need to add an admin password, and then a new password for the guest. Con rm
the password and hit apply. The guest is able to watch the cameras, but they do
not have the functions that an admin has.
• Network - In the network, you can choose the network interface (Ethernet or
WI-FI), as well as see and modify network settings. You can select your wireless
network from this section as well. Choose the network and enter the password.
To complete the con guration, the user will need to leave the network section to
see that it has a successful connection. The IP and gateway information will then
be available. You will also notice the STATE 1 light on the camera will ash green
three times every three seconds.
USER MANUAL
MANAGING THE CAMERAS
It is also possible to manage each of the different cam -
eras you have set up. To manage the camera, click
the camera image. You will then be able to go into the
settings section and make changes that will only affect
that particular camera.
These settings are the same as on the computer, and
on the iOS devices. We'll repeat them here for your
convenience.
• About - Indicates the model, software version, device
ID, and nickname for the device.
• Nickname - In this section, you will be able to add a
nickname for the camera, which makes it easier to keep
track of, especially if you have several cameras. Once
37