Vimtag VT-361 User Manual page 21

VIMTAG IP CAMERA VT-361 SECURITY CAMERA
want to allow on your cameras as guests. First, you need to enter your admin
password, then create the guest password and con rm it. Click on apply, and
your guest password is created and ready to go. The guest password added in
this area will only work for the particular camera that you choose. Keep in mind
that the guests will have limited abilities and permissions, as discussed earlier in
the manual.
NETWORK
The Network Tab will allow you to choose the network interface that you want
to use - Ethernet or WI-FI. When you click on Ethernet, you will also be able to
enable and disable the camera on the network from this tab. You will also nd the
MAC address, and see the network status and all of the IP information regarding
the network.
When you choose WI-FI from the list, you will also see the MAC address, mode,
network status, DNS, and IP information. You will also be able to choose WI-FI
access points from the dropdown list. If you do not see your network, you can
refresh the list. When you look on this list, you will be able to see the strength of
the WI-FI symbol. The more bars the better the connection. If you have hidden
WI-FI, you need to make sure that the network is unhidden during the setup. This
ensures that you can nd your network. After setting it up, you can hide your
connection again.
You will need to enter the WI-FI password information to connect.
OSD (On Screen Display)
21