Vimtag VT-361 User Manual page 20

USER MANUAL
• Network
• OSD (On Screen Display)
• SD Card
• Motion Sensitivity
• Alarm Action
• Schedule Recording
• Date/Time
• System
• Others
ABOUT
In this section, you will nd information about the particular camera that you are
using. It features several sections:
• Model - Shows the model of the camera you are using. In this case, it is the Vi -
mtag IP Camera VT-361.
• Software Version - This shows the current software version you are using.
• Plug-in Version - Lets you know the version of the plug-in you are using.
• Device ID - This is the identifying number for your device.
NICKNAME
In this section, you will be able to enter a nickname for your camera. Simply type
the name into the box and then click on apply. Now, that camera will go by that
particular nickname when it shows up on the left side of the screen. This can make
it nice and easy to know which camera is which quickly. For example, you may
have one nicknamed Of ce, one named Baby's Room, etc. If you do not make
your own name, it will use the default name.
ADMIN PASSWORD
In this section, you will be able to change your admin password. To do so, simply
type in your old password in the top box, then type in the new password below.
Con rm your new password by typing it again, and then hit apply. You can change
the password as many times as you need.
Each camera can have an admin password. You can choose to give a person
admin permissions on a single camera, but not all of the other cameras in your
system, when you change the password through this setting.
GUEST PASSWORD
Under the Guest Password tab, you can create a password for others that you
20