Advertisement
Quick Links
V1.1
Cloud IP Camera
CP1 Series
Quick Installation Guide
Thank you for using Vimtag Cloud IP Camera, Please
follow these steps.
Product Diagram
IR LEDS
Lens
Light Sensor
Wi-Fi Indicator
Ethernet Indicator
Light
Light
Micro SD
Microphone
Card Slot
Note- Model CP1-C does not support Wi-Fi and night version function.
Description
Introduction
IR LEDS
Supply light under low-light condition
Light Sensor
Infrared light adjustment.
Ethernet Indicator
Green light flashes 3 times that shows Ethernet
Light
connection successfully.
Wi-Fi Indicator
Green light flashes 3 times that shows Wi-Fi
Light
connection successfully.
Support Micro SD Card Storage ( up to 64G).
Micro SD Card Slot
Microphone
Transfer the voice to vimtag APP.
Reset needle
Ethernet
Speaker
FN Button
Power
RESET
Description
Introduction
Reset needle
For clicking the reset hole
Ethernet
xxternal WAN port.
Power
5V-2A external power.
Speaker
Audio from the APP side.
FN Button
Reserved function key.
RESET
Long press RESET button when device is running
normal and after hear the hint tone, device will restore
factory settings and restart
'Vimtan' APP Installation
A.Scan 'Vimtan' APP QR code.
B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android).
Note- PC users pls download it as：http-//vimtag.com/download/
Add Camera to APP
1. Assemble the camera and connect to power, download the Vimtan APP, then
renister an account and lonin in.
2. xnter 'Device List' and click '+' icon at the top of left corner. Then scan the QR
code (or enter the ID code in the lable directly) to finish the 'add devices'.
Network Connection
Method 1: xthernet connection
1. Connect cable and click the xthernet icon.
2. When xthernet indicator linht flashes three times in nreen every three seconds,
which means the camera is connected to network successfully.
Router
Power
Method 2: Wi-Fi connection
Click the Wi-Fi connection icon, operate it uder the APP instrutions
Note: please press RxSxT button for 1 second before operate, then can enter
the Wi-Fi confinuration mode
Router
Power
Phone
Advertisement
Related Manuals for Vimtag CP1 Series
Summary of Contents for Vimtag CP1 Series
- Page 1 2. When xthernet indicator linht flashes three times in nreen every three seconds, which means the camera is connected to network successfully. Lens Light Sensor B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android). Wi-Fi Indicator Ethernet Indicator Router Cloud IP Camera Note- PC users pls download it as：http-//vimtag.com/download/...
- Page 2 Create Username & Sinn in Device list View the video Check the video and alarm messane Device settinns New Account - Select ‘Sinn up’ from the Home Screen, input a username When you lonin to the account and access the device list, it will show multiple Click the camera icon so that you can view the camera video, after you lonin to xnter into the interface of ‘information and video viewinn’...