Vimtag VT-361 User Manual page 27

VIMTAG IP CAMERA VT-361 SECURITY CAMERA
you can change the time manually if you prefer. You want to have the correct date
and time so you can schedule your recordings appropriately.
SYSTEM
Under system, you will see three sections. The rst is Online Upgrade, which is
very important, and one that you should check on a monthly basis. If there is an
update available, it will let you know. You can then click for the upgrade. This will
provide xes and updates for the camera. If there is no new update at the time, it
will say "No update available".
Next, you will see "Restore to Factory Settings". If you click on that section, it can
restore the camera to all of the factory defaults, and can be helpful in case you've
made changes to the camera that you can't gure out how to change back.
When you choose this option, here's something very important to note. You also
have the choice to keep or remove the network settings. If you do not keep the
network settings, then you will have to reenter all of this information to get the
camera working on your network again. It's recommended that you keep the net -
work settings, and simply restore the other parts of the camera back to factory
settings.
Restart is a way to reboot the camera. It is the same as unplugging the camera
and plugging it back in again. Something to remember is that whenever the cam -
era goes of ine - using the Restart button, etc. - it will remove the snapshots if you
do not have an SD card.
If you do have an SD card, the information is safe. Many use the Restart button as
a way to clear the images from their camera quickly.
27