Vimtag VT-361 User Manual page 35

DOWNLOAD THE APP
To use the Vimtag app on your Android device, you will need to be running Android
OS2.1 or later, and you need to have a CPU that's at least 600MHz.
A. Scan the barcode OR download the "Vimtag" APP and install it.
B. You can also download the "Vimtag" on Play store .
LOGGING IN AND CONFIGURING THE NETWORK
Once you've installed the application, tap on the icon to open it. You can enter
your information in one of two ways, just as on the iPhone.
the default password for all of the cameras is admin.
To add the camera, you will tap the menu icon in the upper left cor t ype it into
the system manually, as before. After inputting the ID correctly, you m
prompted to change your password. Now is a great time to do it.
To modify your password, you can set up the WI-FI. Select the WI-FI access point
and enter the password for your network. This will add the camera to the list. You
can repeat these steps if you have several cameras. If you need to delete a cam -
era, you can simply do a long press on the camera in question, and then select
delete from the menu that pops up.
Once you have one or more cameras set up, you will be able to see the feed
through your phone. You will know if the camera is working properly because the
video will have a green dot located on the left side of the image. If it is red, it
means the camera is of ine. Refer to the previous chapter to learn how to trouble -
shoot an of ine camera.
If you want to view the full screen, you can simply tap on the camera. Once you
have the live view of the camera up, you can move the camera by swiping right,
left, up, and down with your nger. To zoom in, use two ngers and spread them
apart. To zoom out, do the opposite by pinching your ngers together on the
screen.
USER MANUAL
THE ANDROID APP
35
keep in mind
that
ay be