Vimtag VT-361 User Manual page 38

VIMTAG IP CAMERA VI-361 SECURITY CAMERA
• OSD (On Screen Display) - On the OSD screen, you can con gure what text
will appear on the video screen while you are watching it. You can choose to add
a display name, date, time, and day of the week by tapping on each button. You
can have all, some or none of this information displayed based on your preferenc -
es. Once you have made your chances, tap on apply to keep the changes.
• SD Card - When you have an SD card installed in the camera, its status and
capacity will appear in this section. You will be able to enable or disable the case,
check the status, capacity, usage, and available space. You can also format, repair,
and uninstall the SD card from this section.
• Alert Device - In this section, you are able to adjust the motion sensitivity for the
camera with an easy to use slider. Sliding to the left makes it more sensitive, while
sliding to the right makes it less sensitive. In addition, this section has options for
input and output for additional devices you might have attached to your camera.
Most people will not need to use anything except the motion sensitivity slider in
this section.
• Alarm Action - This section will allow you to choose what needs to occur when
an alarm is triggered via the alarm device or motion detection.
• Date/Time - You can set the day and time manually on this screen, or you can
synchronize it with a timeserver.
• Scheduled Recording - On this screen, you will be able to schedule up to four
different recording sessions.
38