Preset Menu; Self Test - Anritsu S412E User Manual

System Operations
5-8

Preset Menu

Key Sequence: Shift, Preset (1)
Preset
Preset
Save
Setup
Recall
Setup
Figure 5-20. Preset Menu
5-9

Self Test

At power on, the LMR Master runs through a series of quick checks to ensure that the system
is functioning properly. The System Self Test runs a series of tests that are related to the
instrument itself. The Application Self Test runs a series of tests that are related to the
current operating mode of the instrument.
If the LMR Master is within the specified operating range with a charged battery and the self
test fails, contact your Anritsu Service Center at http://www.anritsu.com/contact-us.
To start a self test when the system is already powered up:
1. Press the Shift key and then the System (8) key.
2. Press the Self Test submenu key. The Self Test results are displayed.
3. Press Esc to continue.
S412E UG
Preset: Press this submenu key to reset the instrument to the default
starting conditions.
Save Setup: Press this submenu key to open the Save dialog box
(Figure 4-1 on page
allowing them to be recalled later to return the instrument to the state it was
in at the time the setup was saved.
The saved setup can be named using the touch screen keyboard. Use the
Caps key to select an upper case letter. Use the Left/Right directional
arrows to move the cursor position. Press Enter to save the setup.
Note: Set the File type as Setup. Refer to
details.
Recall Setup: Press this submenu key to select and recall a previously
stored instrument setup using the
rotary knob, the Up/Down arrow keys, or the touchscreen to highlight the
saved setup, and press Enter. All current instrument settings are replaced
by the stored setup information.
PN: 10580-00318 Rev. P
4-3) to name and save the current operating settings,
"Recall Menu" on page

5-8 Preset Menu

"Save Menu" on page 4-9
4-12. Use the
for
5-17