Ptc Mode; Tetra Mode - Anritsu S412E User Manual

System Operations

PTC Mode

Key Sequence: Shift, System (8) > Application Options
Options
Load PTC
Patterns
Back
Figure 5-10. Application Options Menu (PTC Mode)

TETRA Mode

Key Sequence: Shift, System (8) > Application Options
Options
Load TETRA
Patterns
Back
Figure 5-11. Application Options Menu (TETRA Mode)
S412E UG
Load PTC Patterns: Press this submenu key to load additional PTC signal
patterns into the instrument. Refer to
on page 5-10 before continuing.
Back: Press this submenu key to return to the
Load TETRA Patterns: Press this submenu key to load additional TETRA
signal patterns into the instrument. Refer to
Patterns" on page 5-10
Back: Press this submenu key to return to the
PN: 10580-00318 Rev. P
5-4 Application Options Menu
"Updating Signal Generator Patterns"
before continuing.
"System Menu" on page
"Updating Signal Generator
"System Menu" on page
5-4.
5-4.
5-9