Managing Files; Save Files - Anritsu S412E User Manual

4-3 Managing Files

4-3 Managing Files
Press the Shift key then the File (7) key on the numeric keypad to list the File menu.
When navigating through the File menu, pressing the Esc key returns to the
Note
previous menu.

Save Files

Set the Save Location
Press Save then the Change Save Location submenu key and select the location to save files.
Files can be saved to the internal memory or to an external USB flash drive. New folders can
be created at either location. Press Refresh Directories to update the location tree. Press the
Set Location key to set the save location.
Save Measurement As
The Save Measurement As key is used to quickly save measurements with a specific file
name. The LMR Master saves the measurement with the latest file name that was used to
save a measurement and with a number that is automatically incremented and appended to
the end of the file name. For instance, if the last measurement was saved with the name
System Return Loss, Save Measurement As saves the next measurement as System Return
Loss_#1, System Return Loss_#2 etc. The file name used can be changed using the Save
dialog box (Figure 4-1).
Save a Measurement
Press the Save Measurement key and enter the name for the measurement file.
Save a Setup
Press the Save submenu key, type a name for the setup file, confirm that the file type is Setup
using the Change Type key or the touchscreen, and then press Enter to save.
Create a Menu Shortcut for a Setup File
Press the Recall submenu key to display saved setup files. Locate the setup file to shortcut
and then using the touch screen press and hold on the file name for a few seconds. Select a
location in the shortcut grid to save the setup file.
Save a Measurement Screen as JPEG
Press the Save submenu key, type a name for the JPEG file, confirm that the file type is Jpeg,
and press Enter to save.
4-2 PN: 10580-00318 Rev. P
File Management
S412E UG