Rx And Tx Power Offset; Select The Measurement Types - Anritsu S412E User Manual

Quick Start Guide
5. Under the Amplitude main menu, set the signal generator output power using the
Tx Output Lvl submenu.
6. Press the Turn Sig-Gen ON main menu key to turn on the internal signal generator.
The menu button display Turn Sig-Gen OFF when the generator is running.

Rx and Tx Power Offset

To obtain accurate results, compensate for any external attenuation or gain by using the
Rx Power Offset or Tx Power offset submenus under the Amplitude main menu key. In power
offset mode, the compensation factor is in dB.
Press the Rx Power Offset or Tx Power Offset submenu key and use the keypad, the arrow
keys, or the rotary knob to enter the desired offset value. When using the rotary knob, the
value changes in increments of 0.1 dB. Using the Left/Right arrow keys changes the value in
10% increments of the value shown on the Scale submenu key. The power offsets for Tx and
Rx are displayed in the instrument settings summary column on the left side of the
measurement display.

Select the Measurement Types

NBFM Analyzer Measurement
1. Press the Measurement main menu key, then press the NBFM Analyzer submenu key.
Press Graph Type to set the displayed graph types
2. Select the graph to change with the Active Graph submenu key or the touchscreen.
Change the graph with the Graph Type submenu key.
Figure 3-9. NBFM Analyzer Measurements (Active Graph has the Red Outline)
S412E UG PN: 10580-00318 Rev. P
3-6 NBFM Analyzer
(Figure 3-11).
3-15