Touch Screen Keys; Keypad Menu Keys (1 To 9); Led Indicators - Anritsu S412E User Manual

2-3 Front Panel Overview
Number Keypad
The Number keypad has two functions: The primary function is number entry. The
secondary function of the number keypad is to list various menus.
Rotary Knob
Turning the rotary knob changes numerical values, scrolls through selectable items from a
list, and moves markers. Values or items may be within a dialog box or an edit window.

Touch Screen Keys

Main Menu Touch Screen Keys
These five main menu keys are horizontally arranged along the lower edge of the touch
screen. The main menu key functions change to match specific instrument Mode settings. The
main menu keys generate function-specific submenus. The various measurement modes are
selected by pressing the Shift key and then the Mode (9) key. Descriptions of the various
measurement modes can be found in the applicable Measurement Guides listed in
Appendix A, "Measurement
Available measurement modes are based on model and options purchased.
Note
Refer to
Submenu Touch Screen Keys
These submenu keys are arranged along the right-hand edge of the touch screen. The
submenu key labels change as instrument measurement settings change. The current
submenu title is shown at the top of the submenu key block.

Keypad Menu Keys (1 to 9)

Pressing the Shift key followed by pressing a number key selects the menu function that is
printed in blue characters above the number key. Refer to
Not all Secondary Function Menus are active in various measurement modes. If any one of
these menus is available in a specific instrument mode of operation, then it can be called from
the number keypad. It may also be available from a main menu key or a submenu key.
The Preset Menu (1) and System Menu (8) are described in
The Sweep Menu (3), Measure Menu (4), Trace Menu (5), and Limit Menu (6) vary depending
on measurement mode, refer to the Measurement Guides listed in
information. The File Menu (7) is described in
Menu (9) is described in

LED Indicators

Power LED
The Power LED is located to the left of the On/Off key. The LED is solid green when the unit
is on and slowly blinks when the unit is off but has external power.
Charge LED
The Charge LED is located to the right of the On/Off key. The LED slowly blinks when the
battery is charging and is solid green when the battery is fully charged.
2-6
Guides".
Table 1-1 and the Technical Data Sheet for additional information.
"Mode Selector Menu" on page
PN: 10580-00318 Rev. P
Figure 2-1 on page
Chapter 5, "System Operations
Chapter 4, "File Management". The Mode
2-16.
Instrument Overview
2-2.
Appendix A for
S412E UG
".