2-7 Data Entry
Instrument Overview
Additional Symbols
Single Sweep
Single Sweep is selected. Press Continuous in the Sweep menu to resume continuous
sweeping.
Floppy Icon
Shortcut to the Save submenu. Touch the icon to open the touch screen keyboard for saving
measurements, setups, or screen displays.
Figure 2-12. Floppy Icon
2-7
Data Entry
Numeric Values
Numeric values are changed using the rotary knob, arrow keys, or the keypad. Pressing one
of the main menu keys displays a list of submenus on the right side of the touch screen. When
the value on a submenu key is displayed in red, it is ready for changing. When using the
rotary knob or arrow keys the changing value is shown on the submenu and in red on the
graticule. When using the keypad, the new value is shown in red on the graticule and the
submenu changes to Units. Selecting a unit for the new value completes the entry.
Parameter Setting
Pop-up list boxes or edit boxes are used to provide selection lists and selection editors. Scroll
through a list of items or parameters with the arrow keys, the rotary knob, or the touch
screen. These list boxes and edit boxes frequently display a range of possible values or limits
for possible values.
Finalize the input by pressing the Enter key. At any time before finalizing the input, press the
escape (Esc) key to abort the change and retain the previously existing setting.
Some parameters (such as for antennas or couplers) can be added to list boxes by creating
them and importing them using Master Software Tools.
2-14
PN: 10580-00318 Rev. P
S412E UG