Chapter 4-File Management; Introduction; File Types - Anritsu S412E User Manual

Chapter 4 — File Management
4-1

Introduction

This chapter describes the file management features of the LMR Master and describe the
File menu. The submenus under this menu allow you to save, recall, copy, and delete files in
internal memory or an external USB flash drive.
4-2

File Types

Filename extensions that are used in the LMR Master:
*.spa for SPA measurement
*.mna for VNA and VVM measurements
*.s2p S2P (SnP) for VNA S-parameter measurements
*.hipm for High Accuracy Power Meter measurements
*.pm for Power Meter measurements.
*.cwsg for CWSG measurements.
*.afp for AM/FM/PM measurements
*.ia for Interference Analysis measurements
*.cs for Channel Scanner measurements
*.wmxd for WiMAX
*.wmxe for Mobile WiMAX
*.lte for LTE measurements
*.nbfm for NBFM measurements
*.p25 for P25 measurements
*.p252 for P25p2 measurements
*.nxdn for NXDN measurements
*.dpmr for dPMR measurements
*.dmr2 for DMR 2 measurements
*.ptc for PTC measurements
*.tetra for TETRA measurements
*.jpg for JPEG images
*.stp for Setup files
*.lim for Limit lines
S2P is a standard ASCII text file format that is used for scattering parameters from
Note a 2-Port measurement. This is a subset of SnP (where n equals the number of
ports).
S412E UG PN: 10580-00318 Rev. P 4-1