Anritsu S412E User Manual page 87

System Operations
Remote Access Password
Warning Do not use SCPI commands with this feature.
This function is valid only with Master Software Tools (MST) v2.21.1 or later. After setting
the password, reboot the instrument (normal power OFF then ON) to provide remote access
security. Only one user then has remote access at any one time.
The password is first set into the instrument, then used in MST. When prompted in MST,
enter the password into the password text box. The password text box shown in
may differ from the text box that is displayed on your instrument.
Figure 5-15. Remote Access Password Text Box
The password can be removed or reset by a Master Reset, by a Factory Default reset, or by a
firmware update (which includes a restart).
Figure 5-16. Input Power Caution Text Box
S412E UG
Password
Press Shift for Caps
Use arrow keys to navigate cursor within file name
Enter to Save
CAUTION !
To prevent damage to the instrument, NEVER connect
a transmitter directly to the input ports.
Input power limits per port:
RF In port: 50 Ohms, +33 dBm MAX, +50 VDC MAX
VNA port 1: 50 Ohms, +23 dBm MAX, +50 VDC MAX
VNA port 2: 50 Ohms, +23 dBm MAX, +50 VDC MAX
Press ESC to continue.
PN: 10580-00318 Rev. P
5-5 System Options Menu
Figure 5-15
5-13