Lenovo ThinkServer TD350 User Manual And Hardware Maintenance Manual page 54

The following illustration shows the location of the hot-swap-drive backplane. To access the backplane,
open the server cover and remove the AnyRAID adapter. See "Removing the server cover" on page 72 and
"Replacing the AnyRAID adapter" on page 159.
Notes:
• Depending on the model, your server might look different from the following illustration.
• The following illustration is based on server models that have fifteen 3.5-inch-drive bays with one
backplane 1 .
Figure 20. Backplane location
40
ThinkServer TD350 User Guide and Hardware Maintenance Manual