Lenovo ThinkServer TD350 User Manual And Hardware Maintenance Manual page 113

6. Locate the connector for the RAID 110i upgrade key on the system board. Then, insert the RAID
110i upgrade key into the upgrade key connector. Ensure that the RAID 110i upgrade key is securely
seated on the system board.
Figure 59. Installing the RAID 110i upgrade key
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 180. Then, the onboard
SATA software RAID 5 is available for your server if your server has the required number of storage drives
installed. To configure RAID, see "Configuring RAID" on page 65.
Removing the RAID 110i upgrade key
Attention: Do not open your server or attempt any repair before reading and understanding "Read this first: safety
information" on page iii and "Guidelines" on page 69.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
.
Chapter 6 Replacing hardware
99