Potential system error (system health LED: amber)
A power cord has been disconnected or a redundant
power supply has been removed.
The system is overheated.
6
USB 2.0 connectors (2)
Used to connect USB devices (USB 1.0, USB 1.1, and USB 2.0 compatible), such as a USB keyboard,
mouse, scanner, or printer. If you have more than six USB devices, you can purchase a USB hub, which
you can use to connect additional USB devices.
Rear view of the server
Note: Depending on the model, your server might look slightly different from the illustration in this topic.
Figure 4. Rear view of the server with two hot-swap redundant power supplies
1
Hot-swap power supplies (2)
3
VGA DB-15 connector
5
USB 3.0 connectors (4)
7
Ethernet RJ-45 connector 2
9
Server cover key
11
PCIe card slots (4)
22
ThinkServer TD350 User Guide and Hardware Maintenance Manual
Solution
1. Ensure that the power supplies are installed securely.
2. Ensure that the power cords are connected securely
to the power supplies.
3. Install a new power supply to replace the removed
one.
Check the BMC for errors and then check the system
fans.
2
ID LED
4
PCIe card slots (3)
6
Ethernet RJ-45 connector 0
8
Ethernet RJ-45 connector 1
10
Serial connector