Installing Or Replacing A Hot-Swap Redundant Power Supply - Lenovo ThinkServer TD350 User Manual And Hardware Maintenance Manual

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to "Completing the parts replacement" on page 180.

Installing or replacing a hot-swap redundant power supply

Attention: Do not open your server or attempt any repair before reading and understanding "Read this first: safety
information" on page iii and "Guidelines" on page 69.
Depending on the model, your server might come with one or two hot-swap redundant power supplies.
When the server is populated with two hot-swap redundant power supplies, the server can withstand a
power loss from either power supply. This helps you avoid significant interruption to the operation of the
server when a power supply fails. You can replace the failing hot-swap redundant power supply without
turning off the server.
Some server models come with only one power supply. You can purchase a hot-swap redundant power
supply from the Lenovo Web site at:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with
one of these parts, contact a service technician.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
.
Chapter 6 Replacing hardware
147