Calibrate Ch2 0Ma; Calibrate Ch2 20Ma - Omega FC-21 User Manual

FC-21 Flow Computer
Sub-menus
8.2.8 Calibrate ch2

Calibrate CH2 0mA

Iin=TB1-8
Submenu Group
Calibrate ch2
Calibrate ch2
Calibrate ch2
Iin=TB1-8
Calibrate ch2
8.2.9

Calibrate CH2 20mA

Iin=TB1-8
Submenu Group
Calibrate ch2
Calibrate ch2
Calibrate ch2
Iin=TB1-8
Display
GND=TB1-4
ENTER
0 CALIBRATING ——
*** DONE ***
GND=TB1-4
STOP
GND=TB1-4
ENTER
0 CALIBRATING ——
*** DONE ***
GND=TB1-4
STOP
Advance to
Calibrate ch1 0V
0mA To Calibrate: Connect Current Source (+)
TB1-8, (-) TB1-4. Input 0mA and press Enter.
0mA This message is displayed during calibration.
0mA This message is displayed when the 0mA
calibration is finished.
The display will automatically return to the
0mA Calibrate CH2 0mA submenu. Press the
Down arrow key to advance to the CH2 20mA
calibration.
20mA To Calibrate: Connect Current Source (+)
TB1-8, (-) TB1-4. Input 20mA and press
Enter.
20mA
This message is displayed during calibration.
20mA
This message is displayed when the 20mA
calibration is finished.
20mA The display will automatically return to the
Calibrate CH2 20mA submenu. Press the
Down arrow key to advance to the CH1 0V
calibration.
48
Notes