Select Flow Equation; Setup Indicators (Total); Setup Indicators (Density) - Omega FC-21 User Manual

Sub-menus

SELECT FLOW EQUATION

6.4.3
SELECT
FLOW EQUATION
SELECT FLOW EQUATION
Volume Mass
6.4.4
SETUP
INDICATORS
(Total)
SETUP INDICATORS
Total Dens Rate Temp
TOTAL DESCRIPTOR
TOTAL VOLUME UNITS
TOTAL DEC PLACES
SETUP INDICATORS
6.4.5
Total Dens Rate Temp
SETUP
INDICATORS
(Density)
DENSITY MASS UNITS
DENSITY DEC PLACES
Display
ENTER
Cor/Vol
ENTER
Advance To
SETUP INDICATORS
(Total)
SETUP INDICATORS
ENTER
ENTER
TOTAL
ENTER
gal
ENTER
ENTER
Advance To
SETUP INDICATORS
(Density)
ENTER
DENSITY DESCRIPTOR
ENTER
ENTER
ENTER
Advance To
SETUP INDICATORS
(Rate)
Press ENTER to enter Select Flow Equation
submenus.
Press ENTER when desired flow equation is
flashing.
Press ENTER to begin setup of the Indicators
Press ENTER when Total is flashing to
configure the Totalizer Indicators
Enter the desired Total Descriptor
Enter the desired Volume Units Label for the
Totalizer.
Select the desired Total Decimal Place.
0-3 decimal places allowed.
0
Press ENTER when Dens is flashing to
configure the Density Indicators.
Enter the desired Density Descriptor.
DENS
Enter the desired Mass Units Label for
lbs
Density.
Select the desired Density Decimal Place.
0-3 decimal places allowed.
0
23
FC-21 Flow Computer
Notes