Setup Control Inputs(Rate/Total); Setup Control Inputs(Batch); Setup Realtime Clock(Time); Setup Realtime Clock(Date) - Omega FC-21 User Manual

FC-21 Flow Computer
Sub-menus
6.4.16 SETUP CONTROL INPUTS
SETUP CONTROL
INPUTS
(RATE/TOTAL)
SETUP CONTROL INPUTS
Input1 Input2 Input3
CONTROL INPUT1 USAGE
INHIBIT_TOTAL
CONTROL INPUT2 USAGE
RESET_TOTAL
CONTROL INPUT3 USAGE
Prn
SETUP REALTIME CLOCK
6.4.17
SETUP CONTROL INPUTS
SETUP CONTROL
Input1 Input2 Input3
INPUTS
(BATCH)
CONTROL INPUT1 USAGE
Start
CONTROL INPUT2 USAGE
Stop
CONTROL INPUT3 USAGE
Rst Prn KeyLk Ack NA
SETUP REALTIME CLOCK
Display
ENTER
ENTER
NA
NA
Ack KeyLk NA
ENTER
Advance To
ENTER
Rst/Start NA
Stop/Rst NA
ENTER
Advance To
Press Enter to begin setup of the Control
Inputs.
Select the desired Control Input for setup.
If Control Input 1 Selected,
Select Inhibit Total or NA (Not Assigned).
If Control Input 2 Selected,
Select Reset Total or NA (Not Assigned).
If Control Input 3 Selected,
Select Prn (Print), Ack (acknowledge), KeyLk
(Keylock) or NA (Not Assigned). ACK will
acknowledge and clear alarms and warning
messages.
Note: Alarms may reassert themselves if
alarm conditions are still present.
Select the desired Control Input for setup.
If Control Input 1 Selected,
Select Start ,Reset/Start, NA (Not Assigned).
If Control Input 2 Selected,
Select Stop, Stop/Reset, NA (Not Assigned).
If Control Input 3 Selected,
Select Prn (Print), Ack (acknowledge), KeyLk
(Keylock) or NA (Not Assigned). ACK will
acknowledge and clear alarms and warning
messages.
Note: Alarms may reassert themselves if
alarm conditions are still present.
32
Notes