Setup Aux Input - Omega FC-21 User Manual

FC-21 Flow Computer
Sub-menus
6.4.11

SETUP AUX INPUT

SETUP AUX INPUT
AUX INPUT TYPE
NOTE:
When Density (Dens) None
is selected, The menu
prompts will be very
similar to the Tem-
AUX SIGNAL TYPE
perature prompts.
Voltage Current
The menus will
prompt the user for
density values and
density units.
INPUT SIGNAL RANGE
0-10V
INPUT SIGNAL
4-20mA
AUX LOW SCALE
AUX FULL SCALE
AUX DEFAULT
AUX LOW ALARM
AUX HIGH ALARM
DENS EXTRACT METHOD
Therm_Coef
SET FLUID PROPERTIES
Display
ENTER
Temp
Dens
ENTER
RTD
ENTER
0-5V 1-5V
RANGE
0-20mA
ENTER
###### F
ENTER
###### F
ENTER
###### F
ENTER
###### F
ENTER
###### F
ENTER
API_2540
ENTER
Advance To
Press ENTER to begin setup of the Auxiliary
Input.
Select Temperature to set the Auxiliary Input
for Temperature inputs.
Choose Temperature Signal Type.
Advance to "Aux Default", if RTD selected.
If Voltage selected,
Choose desired Voltage Range. Skip if RTD.
If Current selected,
Choose desired Current Range. Skip if RTD.
Enter the low temperature scale
corresponding to the low temperature signal.
Skip if RTD.
Enter the high temperature scale
corresponding to the high temperature signal.
Skip if RTD.
Enter the Default Temperature.
The unit will use this value if the temperature
input fails.
Enter the Low setpoint for the Temperature
Alarm.
Enter the High setpoint for the Temperature
Alarm.
Choose the Density Extraction method to be
used.
28
Notes