Setup Indicators (Rate); Setup Indicators (Temperature) - Omega FC-21 User Manual

FC-21 Flow Computer
Sub-menus
6.4.6 SETUP INDICATORS
Total Dens Rate Temp
SETUP
INDICATORS
(Rate)
RATE TIME BASE
Sec
RATE DESCRIPTOR
RATE DEC PLACES
RATE AVG FILTER
QUICK UPDATE %
6.4.7
SETUP INDICATORS
SETUP
Total Dens Rate Temp
INDICATORS
(Temperature)
TEMP DESCRIPTOR
TEMPERATURE SCALE
Deg_C
TEMP DEC PLACES
Display
ENTER
Min Hour
ENTER
ENTER
ENTER
ENTER
ENTER
Advance To
SETUP INDICATORS
(Temperature)
ENTER
ENTER
Deg_F
ENTER
ENTER
Advance To
SETUP FLOW INPUT
Press ENTER when Rate is flashing to
configure the Ratemeter Indicators
Select the desired Rate Time Base.
Day
Enter the desired Descriptor for the
RATE
Ratemeter.
Select the desired Rate Decimal Place.
0-3 decimal places allowed.
0
Enter desired Rate Averaging Filter.
0
Enter desired Percent of Change for Quick
5 Update. If the current flowrate deviates by an
amount greater than the percentage value
entered, the Rate Averaging is inhibited.
(See Page 57 for more details.)
Press ENTER when Temp is flashing to
configure the Temperature Indicators.
Enter the desired Temperature Descriptor.
TEMP
Enter the desired Temperature Scale.
Select the desired Temperature Decimal
0-3 decimal places allowed.
0
Place.
24
Notes