Table of Contents
Advertisement
Chapter 3: BIOS Setup
USB Configuration
This section is used to configure the USB.
USB Configuration
Displays the detected USB devices.
Legacy USB Support]
Enable Enables Legacy USB.
Auto
Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved
EHCI Hand-Off
This is a workaround for OSs that does not support EHCI hand-off. The
EHCI ownership change should be claimed by the EHCI driver.
Device Reset Timeout
Selects the USB mass storage device's start unit command timeout.
38
EBC 354 User Manual
Advertisement
Table of Contents
