Nexcom EBC 354 User Manual page 50

Chapter 3: BIOS Setup
IDE Configuration
This section is used to configure the IDE drives.
SATA Controller(s)
Enables or disables SATA ports 0-3.
Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved
Configure SATA As
IDE
This option configures the Serial ATA drives as Parallel ATA physical storage
device.
RAID
This option allows you to create RAID or Intel Matrix Storage configuration
on Serial ATA devices.
AHCI
This option configures the Serial ATA drives to use AHCI (Advanced
Host Controller Interface). AHCI allows the storage driver to enable the
advanced Serial ATA features which will increase storage performance.
37
EBC 354 User Manual