Checking Energy-Saving Effect [Carbon Meter] - NEC NP3200 User Manual

 Checking Energy-Saving Effect [CARBON METER]

This feature will show energy-saving effect in terms of CO
MODE] is set to [ON]. This feature is called as [CARBON METER]. (→ page 33)
There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON
SAVINGS] message shows the total amount of CO
can check the information on [USAGE TIME] from [INFO.] of the menu. (→ page 74)
The [CARBON SAVINGS-SESSION] message shows the amount of CO
changing to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAV-
INGS-SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE?] message at the time of power-
off.
TIP:
• The formula as shown below is used to calculate the amount of CO
Amount of CO emission reduction = Power consumption in OFF for ECO MODE – Power consumption in ON for ECO MODE x
2
CO conversion factor.*
2
* Calculation for amount of CO
2008 Edition".
• This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.
Downloaded From projector-manual.com NEC Manuals
emission reduction from the time of shipment up to now. You
2
emission reduction is based on an OECD publication "CO2 Emissions from Fuel Combustion,
2
emission reduction (kg) when the projector's [ECO
2
emission reduction between the time of
2
emission reduction.
2
34
4. Convenient Features