Checking Energy-Saving Effect [Carbon Meter] - NEC PX750U2 User Manual

Checking Energy-Saving Effect [CARBON METER]

This feature will show energy-saving effect in terms of CO
is set to [OFF], or [ON]. This feature is called as [CARBON METER].
There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON
SAVINGS] message shows the total amount of CO
check the information on [USAGE TIME] from [INFO.] of the menu. (→ page 133)
The [CARBON SAVINGS-SESSION] message shows the amount of CO
changing to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAVINGS-
SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE ?] message at the time of power-off.
TIP:
• The formula as shown below is used to calculate the amount of CO
Amount of CO emission reduction = (Power consumption in OFF for ECO MODE − Power consumption in ON for ECO MODE) ×
2
CO conversion factor.* When the image is turned off, the amount of CO
2
* Calculation for amount of CO
Edition".
• The [TOTAL CARBON SAVINGS] is calculated based on savings recorded in 15 minutes intervals.
• This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.
emission reduction from the time of shipment up to now. You can
2
emission reduction is based on an OECD publication "CO
2
emission reduction (kg) when the projector's [ECO MODE]
2
emission reduction between the time of
2
emission reduction.
2
emission reduction will also increase.
2
38
3. Convenient Features
Emissions from Fuel Combustion, 2008
2