NEC NP3200 User Manual page 71

Selecting Aspect Ratio [ASPECT RATIO]
The term "aspect ratio" refers to the ratio of width to height of a projected image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.
Options
AUTO
4:3
16:9
15:9
16:10
WIDE ZOOM
NATIVE
Downloaded From projector-manual.com NEC Manuals
Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 768
WXGA 1280 x 800
WXGA+ 1440 x 900
SXGA 1280 x 1024
SXGA+ 1400 x 1050
UXGA 1600 x 1200
The projector will automatically determine the incoming signal and display it in its as-
pect ratio. (→ next page)
The projector may erroneously determine the aspect ratio depending on its signal. If
this occurs, select the appropriate aspect ratio from the following.
The image is displayed in 4:3 aspect ratio.
The image is displayed in 16:9 aspect ratio.
The image is displayed in 15:9 aspect ratio.
The image is displayed in 16:10 aspect ratio.
The image is stretched left and right.
Parts of the displayed image are cropped at the left and right edges and therefore not
visible.
The projector displays the current image in its true resolution when the incoming com-
puter signal has a lower resolution than the projector's native resolution.
[Example] When the incoming sig-
nal with the resolution of 800 x 600
is displayed:
NOTE:
• When a non-computer signal is displayed, the [NATIVE] is not available.
• When a signal with a higher resolution than the projector's native resolution is displayed, [NA-
TIVE] is not available.
Aspect Ratio
4:3
4:3
4:3
15:9
16:10
16:10
5:4
4:3
4:3
Function
60
5. Using On-Screen Menu