Checking Energy-Saving Effect [Carbon Meter] - NEC UM383WL User Manual

Table of Contents

Advertisement

Checking Energy-Saving Effect [CARBON METER]

This feature will show energy-saving effect in terms of CO
is set to [AUTO ECO], [NORMAL], or [ECO]. This feature is called as [CARBON METER].
There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON
SAVINGS] message shows the total amount of CO
can check the information on [USAGE TIME] from [INFO.] of the menu. (→ page 77)
The [CARBON SAVINGS-SESSION] message shows the amount of CO
changing to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAVINGS-
SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE?] message at the time of power-off.
TIP:
• The formula as shown below is used to calculate the amount of CO
Amount of CO
emission reduction = (Power consumption in OFF for ECO MODE − Power consumption in AUTO ECO/NORMAL/ECO for
2
ECO MODE) × CO
conversion factor.* When the image is turned off with the AV-MUTE button, the amount of CO
2
will also increase.
* C alculation for amount of CO
• The [TOTAL CARBON SAVINGS] is calculated based on savings recorded in 15 minutes intervals.
• This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.
emission reduction is based on an OECD publication "CO
2
emission reduction (kg) when the projector's [ECO MODE]
2
emission reduction from the time of shipment up to now. You
2
2
emission reduction.
2
29
3. Convenient Features
emission reduction between the time of
emmission reduction
2
Emissions from Fuel Combustion, 2008 Edition".
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np-um383wl

Table of Contents