3. Installation and Operation
3-2 Operation
3-2-2 Key Board Matrix
3-2-3 Initial Clear
1. Unplug the register.
2. Turn the control lock to the P position.
3. Press and hold the key position where the "SUB TOTAL" key is located on the default keyboard layout.
4. While continuing to hold the "SUB TOTAL" key, plug the register into a power source.
5. The message "****** INITIAL CLEAR ******" prints when the initial clear is complete.
3-12
Figure 3-2. Key Board
Figure3-3. Initial Clear Key & Print Sheet
******
INITIAL CLEAR
SAM4S ER-180T SERIES
******