Mounting On The Wall; Mounting The Platter, Drive Belt And Record Clamp - Pro-Ject Audio Systems VT-E BT L Instructions For Use Manual

13.

MOUNTING ON THE WALL

Mount the turntable on the wall through supplied damping pad Pro-Ject Damp IT.
We recommend using the appropriate type of mounting screw for given type of the wall.
14.

MOUNTING THE PLATTER, DRIVE BELT AND RECORD CLAMP

With the turntable mounted on the wall, install the platter (3) and the drive belt (4) as shown in following
illustration.
After the placing the record on the platter, it is necessary to tighten the screw-able record
clamp (6) onto the platter spindle.
© Pro-Ject Audio Systems · Pro-Ject VT-E BT L · Revision 2016.07.27
11