Mounting Distance Adjustment - Pro-Ject Audio Systems SIGNATURE 10 Instructions For Use Manual

Table of Contents

7. Mounting distance adjustment

Loosen the locking nut allows a linear move of the tonearm. Adjust correct distance by using the scale.

The correct mounting distance of 238 mm on the scale is valid only if the cartridge is in correct position in the

headshell.

There are very special and different cartridge types existing which make a correct mounting distance

impossible. In this case you can change the distance of the arm easily which allows you to use all available

cartridge types.

Additional this feature opens the possibility to use different alignment tools. There are different versions of

alignment tools for setting and optimization of null points. With different settings, you can achieve small sound

variations.

Table of Contents

Do you have a question about the SIGNATURE 10 and is the answer not in the manual?