Download Print this page

Pro-Ject Audio Systems VC-S Instructions For

Download this manual

INSTRUCTIONS FOR USE

Pro-Ject VC-S

Table of Contents

Page 1 INSTRUCTIONS FOR USE Pro-Ject VC-S...
Page 3: Controls, Features And Connections
250ml/ 1l (100ml ≙ 150 records / both sides),  Goat hair brush  Adhesive strips for vacuum arm  Cover it VC-S (lid with hinges and mounting screws) © Pro-Ject Audio Systems · VC-S · Revision 2015.12.21...
Page 4: Safety Instructions
Dear music lover, Thank you for purchasing a Pro-Ject Audio Systems record cleaning machine. In order to achieve maximum performance and reliability, please study these instructions carefully. Warning of a hazard for the user, the unit or possible misuse Important notice During assembling and adjustment small parts could be lost if they are not carefully placed in a suitable receptacle.
Page 5: Using The Unit
Regularly check the velvet strips on the arm. Make sure they are clean, no dirt or debris is present. Always disconnect the record cleaning machine from the mains power supply as a precaution before maintenance! © Pro-Ject Audio Systems · VC-S · Revision 2015.12.21...
Page 6: Warranty
Fitting the lid (Cover it VC-S is an optional accessory) The holes for lid hinges are pre-drilled on the back side of the unit. Each hinge is screwed with 2 screws (supplied with the lid). Fit the lid carefully over the hinge prongs and adjust the screws until the lid stays open where you want it to without being too stiff to open or close.