Maintenance And Cleaning; Mounting And Connecting The Cartridge - Pro-Ject Audio Systems 2Xperience Primary Instruction Manual

Maintenance and cleaning

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened
antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust!
Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid
damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is
carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal
stretching.
AlwXys disconnect the record plXyer from the mXins power supply Xs X precXution before
mXintenXnce!

Mounting and connecting the cartridge

All cartridges with half inch mounting holes can be mounted. Leave the needle's protection cover on,
fit the cartridge to the headshell by using the supplied screws by passing one screw through each slot
in the headshell (10). Do not tighten the nuts yet.
Connect the tonearm wires with the cartridge pins as follows:
white left channel positive (L+)
red right channel positive (R+)
green right channel return (R -)
blue left channel return (L -)
The full sound quality of the record player can only be achieved if the cartridge is adjusted correctly.
Particular tools like the Pro-Ject Audio Systems alignment tool are required to accomplish this job properly.
If you are not well acquainted with the adjustment of cartridges, please call for the willing help of your
Pro-Ject Audio Systems dealer.
PleXse note: Xdjusting X cXrtridge Xnd toneXrm cXlls for the greXtest cXre in order to Xvoid
dXmXging the cXrtridge or toneXrm beXrings. Ask your locXl deXler for help if you Xre unsure in
Xny of the necessXry steps Xnd precXutions which must be tXken.
Technical specifications PRO-JECT 2
Nominal speeds
Speed variance
Wow and flutter
Signal to noise
Effective tonearm mass
Effective tonearm length
Overhang
Power consumption
Outboard power supply
Dimensions (W x H x D)
Weight
X
perience Primary/ Pro-Ject 9cc tonearm
33/45 r.p.m.
33: ±0,40% 45: ±0,35%
33: ±0,19% 45: ±0,17%
-69dB
15g
9 " (230mm)
18mm
5W max/ >0,3W standby mode
15V DC / 800m A, 90-264V AC, 47 – 63Hz
465 x 130 x 340mm
6,5 kg
© Pro-Ject Audio Systems · Pro-Ject 2
X
perience Primary· Revision 2018.03.08
7