Changing Replay Speed; Maintenance And Cleaning; Part 2 - Wall Mount; Disassemblimg The Rear Support - Pro-Ject Audio Systems VT-E BT L Instructions For Use Manual

8.

CHANGING REPLAY SPEED

To play records at 45 r.p.m., put the drive belt (4) over the larger diameter part of the motor pulley (2). To
revert to 33 r.p.m. repeat the proceedings using the smaller step on the pulley.
9.

MAINTENANCE AND CLEANING

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic
cloth. Never use a dry cloth because this will create static electricity which attracts even more dust! Antistatic
cleaning fluids are available at specialized stores but must be applied sparingly to avoid damage to rubber
parts. It is recommended to fit the needle cover before cleaning or maintenance to avoid damage.
If the player is not used over a long period of time, the drive belt should be removed to prevent unequal
stretching.
Always disconnect the record player from the mains power supply as a precaution before maintenance!
PART 2 – WALL MOUNT
10. DISASSEMBLING THE REAR SUPPORT
Remove two M6 screws which holds the rear support (18) in the back of the turntable.
© Pro-Ject Audio Systems · Pro-Ject VT-E BT L · Revision 2016.07.27
9