Assembling The Main Wall Holder; Assembling The Bottom Support - Pro-Ject Audio Systems VT-E BT L Instructions For Use Manual

11.

ASSEMBLING THE MAIN WALL HOLDER

For wall mount it is necessary to mount the main wall holder (1 – mounting kit) instead of the rear support
(18). For correct mounting, follow instructions from next illustration.
12.

ASSEMBLING THE BOTTOM SUPPORT

With the main wall holder mounted on the turntable, unscrew both feet (13) from the bottom and instead of
the feet screw the bottom support (2 – mounting kit) as shown in the following illustration.
Now the VT-E is ready for mounting on the wall.
10
© Pro-Ject Audio Systems · Pro-Ject VT-E BT L · Revision 2016.07.27