Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Pro-Ject Audio Systems THE CLASSIC
Summary of Contents for Pro-Ject Audio Systems THE CLASSIC
- Page 1 INSTRUCTIONS FOR USE The Classic...
-
Page 2: Turntable Overview
© Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... - Page 3 (13) TONEARM FLANGE (14) ANTI-SKATING STUB WITH ANTI-SKATING ADJUSTMENT SCALE (15) ANTI-SKATING WEIGHT SUPPORT (16) LID HINGES (17) (18) HINGE FASTENERS (19) PHONO OUTPUT SOCKET (20) POWER SUPPLY SOCKET © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28...
-
Page 4: Accessories Overview
Counterweight no. 183 for cartridges with weight between 5 - 9g Single adaptor (10) Hook tool (11) Stylus Pressure Gauge (12) Connect IT E RCA (not shown) (13) Cloth (not shown) (14) Power supply (not shown) © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... -
Page 5: Table Of Contents
8. SWITCHING ON AND OFF 9. CHANGING REPLAY SPEED 10. ADJUSTING THE VERTICAL TRACKING ANGLE (VTA) 11. ADJUSTING THE AZIMUTH 12. USEFUL TIPS 13. MAINTENANCE AND CLEANING TECHNICAL SPECIFICATIONS WARRANTY, SERVICE PACKAGING © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... -
Page 6: Safety Instructions
The turntable was shipped partially disassembled in order to avoid damage to sensitive parts. Please check immediately to make sure that neither the packaging nor the device was damaged in transit. © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... -
Page 7: Setup And Installation
SETUP AND INSTALLATION TRANSPORT SCREWS Remove the three transport screws (7) from the upper part of the chassis before installing the sub-platter (6), the drive belt (5) and the platter (1). © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... -
Page 8: Mounting And Connecting The Cartridge
The full sound quality of the record player can only be achieved if the cartridge is adjusted correctly. Particular tools like the Pro-Ject Audio Systems alignment tool are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges, please call for the willing help of your Pro-Ject Audio Systems dealer. -
Page 9: Anti-Skating Force Adjustment
MM or MC cartridges is required. It has to be connected between record player and a free line level input of the amplifier. For detailed product information regarding Pro-Ject Audio Systems interconnect cables and phono amplifiers please visit our website: www.project-audio.com... -
Page 10: Mains Power Connection
Retighten the hexagon screws without applying excessive force (which would deform the arm pillar) – finger tight is quite sufficient. © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... -
Page 11: Adjusting The Azimuth
If the player is not used over a long period of time, the drive belt should be removed to prevent unequal stretching. Always disconnect the record player from the mains power supply as a precaution before maintenance! © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... -
Page 12: Technical Specifications
Technical specifications MM-Cartridge Ortofon 2M Silver Frequency range 20-22.000Hz Channel separation 23dB/1kHz Output voltage Recommended load impedance 47kohms / amplifier connection – MM-input Compliance/stylus type 20µm/mN – elliptical Recommended tracking force 18mN Weight 7,2g © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... -
Page 13: Warranty, Service
This guide was produced by: Pro-Ject Audio Systems necessary to uphold the ongoing process of technical Copyright © 2016. All rights reserved. development. © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28... - Page 14 © Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28...