Basic Operation; Playback - Marantz PM8003 User Manual

BASIC OPERATION

PLAYBACK

To explain how to play back input sources, representative examples are given with an CD player and analog
record player. Before starting either procedure, check the component is correctly connected to the unit.
DISC PLAYBACK ON AN CD PLAYER
1.
Press the power ON/OFF button of the CD
player to activate power to it.
2.
Press the POWER ON/OFF button
activate power to it. Approximately 8
seconds after power has been activated,
the muting turns OFF and audio output is
enabled.
3.
Select the CD with the INPUT SELECTOR
knob .
4.
To use the speakers connected to the
SPEAKERS SYSTEM terminals, set the
SPEAKERS knob .
5.
Load a disc into the CD player and press the
play button to start playback.
6.
Adjust the volume with from the VOLUME
knob .
7.
Adjust bass/treble as desired with the
BASS and TREBLE knobs . Be sure to first
set the SOURCE DIRECT button in the
OFF position.
DISC PLAYBACK ON AN ANALOG RECORD
PLAYER
1.
Press the POWER ON/OFF switch
to activate power to it. Approximately 8
seconds after power has been activated,
the muting turns OFF and audio output is
enabled.
2.
Select "PHONO" as the input source with
the INPUT SELECTOR knob . To prevent
unexpected accidents, it is recommended
to set the volume level to MIN. by turning
the VOLUME knob until muting the
volume level.
3.
MM type cartridges can be connected. Use
a step-up transformer when using an MC
cartridge.
4.
To use the speakers connected to the
SPEAKERS SYSTEM terminals, set the
SPEAKERS knob .
5.
Set a record on the analog record player
and play it.
6.
Adjust the volume level with the VOLUME
knob .
7.
Adjust bass/treble as desired with the
BASS and TREBLE knobs . Be sure to first
set the SOURCE DIRECT button
OFF position.
INTEGRATED AMPLIFIER PM8003
PHONO CD
INPUT SELECTOR
POWER AMP DIRECT
STANDBY
SPEAKERS BASS
A
POWER ON/OFF B
OFF
A+B
-
to
in the
TUNER AUX/DVD 1 RECORDER 2 MUTE
VOLUME
SOURCE DIRECT
MIN MAX
TREBLE BALANCE
+ - + L R
ENGLISH
9