Marantz PM8003 User Manual page 18

CLEANING OF EQUIPMENT EXTERNAL
SURFACES
The exterior finish of your unit will last indefinitely
with proper care and cleaning, Never use scouring
pads, steel wool, scourging powders or harsh
chemical agents (e.g., lye solution), alcohol, thinner,
benzine, insecticide or other volatile substances as
these wil mar the finish of the equipment. Likewise,
never use cloths containing chemical substances. If
the equipment get dirty, wipe the external surfaces
with a soft, lint-free cloth.
If the equipment becomes heavily soiled:
dilute some
washing up liquid
in water, in a
ratio of one part
detergent to six
parts water.
dip a soft, lint
free in the
solution and
wring the it is
damp.
wipe the equipment with the damp cloth.
dry the equipment by wiping it with a dry cloth.
USING HEADPHONES
If the volume in the headphones is too high, it may
injure your ears. Do not set the sound volume too
high.
REPAIRS
Only the most competent and qualified service
technicians should be allowed to service the
factory-trained warranty station personnel have
the knowledge and special facilities needed for
repair and calibration of this precision equipment.
After the warranty period has expired, repairs will
be performed for a charge if the equipment can be
returned to normal operation.
In the event of difficulty, refer to your dealer or write
directly to the nearest location to you that is listed
on the Marantz Authorized Service Station list. If
writing, please include the model and serial number
of the equipment together with a full description of
what you think is abnormal about the equipment's
behaviour.
ENGLISH
OTHERS
15