Connecting Speaker Systems; Wiring Speaker Cable; Connecting Of Ac Power Cable - Marantz PM8003 User Manual

ENGLISH
BASIC CONNECTIONS

CONNECTING SPEAKER SYSTEMS

Your speaker system must satisfy the below conditions. If it does not, this unit's protective circuit will active,
whereby preventing proper playback. In some cases, the amplifier and speakers may be damaged.
If using 1 set of speakers, total speaker impedance must be 4Ω or more.
If using 2 sets of speakers, total speaker impedance must be 8Ω or more.
PHONO PRE OUT POWER AMP
DIRECT IN
GND
L L L
R R R
CD TUNER AUX RECORDER 1 RECORDER 2
/ DVD IN OUT IN OUT
L L
R R
Set the SPEAKERS knob on the front panel in the A or A+B position.
8
To power outlet
SPEAKERS
SYSTEM A
MODEL NO. PM8003
R L
REMOTE
CONTROL
IN
OUT
R L
R CH L CH
speaker speaker
Notes:
AC IN

WIRING SPEAKER CABLE

Peel off the coating of speaker cable as shown
below.
Approx. 1 cm
Cut the coating Peel off the edge
of cable. of cable.
Wiring with speaker cable.
Turn counter- Insert conductor
clockwise to of cable.
loosen.

CONNECTING OF AC POWER CABLE

1.
Plug the supplied AC power cable to the
AC IN socket on the rear panel of the main
unit.
MODEL NO. PM8003
REMOTE
CONTROL
IN
OUT
2.
Plug the power cable into an AC outlet.
Twist
conductors.
Turn clockwise
to tighten.
AC IN