Contents Connections Playback Settings Tips Appendix Integrated Amplifier PM8005 You can print more than one page of a PDF onto a single sheet of paper. Owner’s Manual Front panel Rear panel Remote Index...
High quality sound ············································································ 6 Performing operations by RC on this unit High performance ············································································ 7 without visual contact ···································································· 22 Easy operation ·················································································· 7 Remotely connecting Marantz devices ·········································· 22 Part names and functions Connecting the power cord ························································ 23 Playback Front panel ························································································...
Page 3
Contents Connections Playback Settings Tips Appendix Settings Setting the Auto Standby mode ··············································· 30 Turning Auto Standby mode off ····················································· 30 Turning Auto Standby mode on ····················································· 30 Setting the power amp direct mode ······································· 31 Turning power amp direct mode on ··············································· 31 Turning power amp direct mode off ···············································...
Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Contents Connections Playback Settings Tips Appendix Inserting the batteries Operating range of the remote control unit q Remove the rear lid in the direction of Point the remote control unit at the remote sensor when operating it. the arrow and remove it. Approx.
It is generally known that the sound quality is not necessarily the same model is used. even if amplifiers have the same specifiations. Marantz considers the cause to be the power to drive speakers. The power amplifier of this unit has the ability to momentarily supply current of 45 A or more to drive speakers strongly.
• Remote control compatible with CD players and network audio terminals that can connect thick audio cables. players The remote control provided with this unit can control Marantz CD players and network audio players in addition to this unit (vpage 13). Front panel...
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel Power indicator Headphone jack (PHONES) This is lit as follows according to the power status : Used to connect headphones. • Power on : Off Turn off speaker output when using headphones (vpage 26). • Standby : Red NOTE • Power off : Off...
Page 9
Contents Connections Playback Settings Tips Appendix Remote control sensor This receives signals from the remote control unit (vpage 5). VOLUME control knob This adjusts the volume level (vpage 26). MUTE indicator This lights while the sound is muted (vpage 26). Input indicator (vpage 26) Input source select knob (INPUT SELECTOR) i o Q0 Q1 This selects the input source (vpage 26).
Contents Connections Playback Settings Tips Appendix Rear panel CD input connectors Recorder input connectors (RECORDER) Used to connect a CD player (vpage 19). Used to connect the output connector of a recorder (vpage 20). Network audio player input connectors (NETWORK) Recorder output connectors (RECORDER) Used to connect a network audio player (vpage 19).
Page 11
Settings Tips Appendix Remote control input/output connectors (REMOTE CONTROL) Used to connect to a Marantz audio device that is compatible with the remote control function (vpage 22). AC inlet (AC IN) Used to connect the power cord (vpage 23). Power amplifier direct connectors (POWER AMP DIRECT IN) Used to connect a pre-amplifier when this unit is used as a power amplifier (vpage 21).
Contents Connections Playback Settings Tips Appendix Remote control unit Amplifier operations Input source select buttons These select the input source (vpage 26). SOURCE DIRECT button This turns SOURCE DIRECT mode on/off (vpage 27). MUTE button ( This mutes the audio (vpage 26). AMP POWER button (X) This turns the power on/off (standby) (vpage 25).
Settings Tips Appendix CD player operations To operate Marantz CD player, press REMOTE MODE CD button to switch the remote control to the CD operation mode. • REMOTE MODE CD button lights for approximately two seconds. POWER button (X) DIMMER button...
Settings Tips Appendix Network audio player operations To operate Marantz network audio player, press REMOTE MODE NET button to switch the remote control to the NETWORK operation mode. • REMOTE MODE NET button lights for approximately two seconds. POWER button (X)
Contents Connections Playback Settings Tips Appendix Speaker connection NOTE Connecting the speakers cables • Disconnect this unit’s power plug from the power outlet before connecting the speakers. Carefully check the left (L) and right (R) channels and + (red) and – (white) • Connect so that the speaker cable core wires do not protrude from the speaker polarities on the speakers being connected to the unit, and be sure to terminal.
Contents Connections Playback Settings Tips Appendix Speaker A/B connection • The same signal is output from the SPEAKERS A and SPEAKERS B terminals. • When only one set of speakers is to be connected, use either the SPEAKERS A or SPEAKERS B terminals. SPEAKERS A SPEAKERS B Front panel...
Contents Connections Playback Settings Tips Appendix Bi-wiring connection • When bi-wiring with bi-wireable speakers, connect the mid and high range terminals to SPEAKERS A (or SPEAKERS B), the low range terminals to SPEAKERS B (or SPEAKERS A). • This connection limits the effect of signal interference between the high range speakers and low range speakers, allowing you to enjoy high quality playback.
Contents Connections Playback Settings Tips Appendix Connecting a playback device You can connect Blu-ray disc players, turntables, CD players, network audio players and tuners to this unit. This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
Contents Connections Playback Settings Tips Appendix Connecting a recording device Recording device AUDIO OUT AUDIO IN NOTE • Never insert the short-circuiting pin plug into the recording output connectors (AUDIO OUT RECORDER). Doing so could result in damage. Front panel Rear panel Remote Index...
Contents Connections Playback Settings Tips Appendix Connecting amplifiers Power Pre- amplifier amplifier AUDIO AUDIO NOTE • Never insert the short-circuiting pin plug into the PRE OUT terminals. Doing so could result in damage. Front panel Rear panel Remote Index...
Remotely connecting Marantz devices unit without visual contact You can transmit remote control signals simply by connecting a Marantz audio device to the REMOTE CONTROL IN/OUT connectors using the You can connect an external IR receiver to the REMOTE CONTROL remote connection cable provided with the device.
Contents Connections Playback Settings Tips Appendix Connecting the power cord Wait until all connections have been completed before connecting the power cord. To household power outlet (AC 230 V, 50/60 Hz) Power cord (supplied) Front panel Rear panel Remote Index...
Contents Connections Playback Settings Tips Appendix Playback Turning the power on (vpage 25) Turning off the sound temporarily (vpage 26) Adjusting the tone (vpage 26) Selecting the speakers for audio output (vpage 26) Selecting the input source (vpage 26) Playing CDs (vpage 27) Adjusting the volume (vpage 26) Recording (vpage 28) Front panel Rear panel...
Contents Connections Playback Settings Tips Appendix Turning the power on AMP POWER Press X on this unit to turn the power on. Input indicator for the selected source lights. Input source select buttons NOTE • Turn VOLUME on this unit to adjust the volume to the lowest level before turning on the power.
Contents Connections Playback Settings Tips Appendix Selecting the speakers for audio output Turning off the sound temporarily Press SPEAKERS A/B to select the speaker system to be Press MUTE used for playback. The mute indicator lights. The indicator of the selected speakers lights. • Muting can be cancelled by pressing MUTE again.
Contents Connections Playback Settings Tips Appendix 2 Playback in source direct mode Playing CDs The signal does not pass through the tone adjustment circuitry (BASS, MID, TREBLE and BALANCE), resulting in playback of a higher sound Press X on this unit to turn the power on. quality.
Contents Connections Playback Settings Tips Appendix Recording Press X on this unit to turn the power on. Press the input source select buttons to switch to the input source from which you want to record. The indicator of the selected input source lights. Recording starts.
Page 29
Contents Connections Playback Settings Tips Appendix Settings Setting the Auto Standby mode (vpage 30) Setting the power amp direct mode (vpage 31) Front panel Rear panel Remote Index...
Contents Connections Playback Settings Tips Appendix Setting the Auto Standby mode You can set the unit to automatically switch to standby mode if the unit is Turning Auto Standby mode off not operated for 30 minutes when there is no audio input. Auto Standby mode is set to on by default.
Contents Connections Playback Settings Tips Appendix Setting the power amp direct mode When a pre-amplifier is connected to this unit and the unit is used as a Turning power amp direct mode on power amplifier, follow the instructions below to turn power amp direct mode on.
Page 32
I want sound playback that is faithful to the original sound .....(33) Operations cannot be performed through the remote control unit ..............(36) I want to operate a Marantz CD player or network audio player using the remote control from of unit ..........(33) No sound comes out ................(37) I want to use this unit as a power amplifier ........(33)
I want sound playback that is faithful to the original sound • Set the Source Direct mode on (vpage 27). I want to operate a Marantz CD player or network audio player using the remote control of this unit • Switch the remote control operating mode (vpage 13, 14).
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem occurs, first check the following: 1. Are the connections correct? 2. Is the unit being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. If the problem persist there may be a malfunction. In that case, disconnect the power immediately and contact your retail outlet.
Page 35
• Turn down the volume and turn on the power again. 25, 26 When the power is turned on, the • This unit’s amplifier circuit has failed. Turn off the power and please contact the Marantz – power indicator flashes red approx.
Contents Connections Playback Settings Tips Appendix 2 Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed • Batteries are worn out. Replace with new batteries. through the remote control unit. • Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
Contents Connections Playback Settings Tips Appendix 2 No sound comes out Symptom Cause / Solution Page No sound comes out of speakers. • Check the connections for all devices. • Insert connection cables all the way in. – • Check that input connectors and output connectors are not reversely connected. –...
Contents Connections Playback Settings Tips Appendix 2 Desired sound does not come out Symptom Cause / Solution Page No sound comes out of a specific • Check that the speaker cable is properly connected. speaker. • Adjust the BALANCE control knob. The left and right of stereo sound is • Check whether the left and right speakers are connected to the correct speaker terminals.
Contents Connections Playback Settings Tips Appendix Appendix Explanation terms Trademark information Protection circuit This is a function to prevent damage to devices within the power supply when an abnormality such as an overload, excess voltage occurs or over temperature for any reason. Adobe, the Adobe logo and Reader are either registered trademarks or If a malfunction occurs in this unit, the power indicator blinks red and the trademarks of Adobe Systems Incorporated in the United States and/or...
Need help?
Do you have a question about the PM8005 and is the answer not in the manual?
Questions and answers