Table of Contents
Advertisement
4.1
Radio Body
The U-bracket is supplied as standard
U-Bracket
for mounting a radio fitted with
either a local control head or a
remote interface (for a remote
mounted control head).
For full details on mounting the
U-bracket and radio, refer to
"Mounting the U-Bracket" on
page 16
on page
The TMAA03-02 security bracket
Security Bracket
can be used in place of the standard
U-bracket in locations where you
want to stop opportunistic removal of
the radio by a third party, or where
you want to have a quick release setup
that allows you to swap over radios
(e.g. leasing situation). The security
bracket also provides electrical
isolation to the radio. Refer to the
TMAA03-02 Security Bracket
Installation Instructions
(402-00014-xx) for full details.
The TMAA03-18/TMAA03-39
Cradle
cradle provides a means of mounting
the radio in a wrap-around protective
enclosure. The radio slides into the
cradle and locks in place. It can only
be removed by inserting a plastic key.
The cradle is not suitable for >25W
>25W
radios or radios with a local
graphical-display control head. Refer
to the TMAA03-18/TMAA03-39
Cradle Installation Instructions
(MMA-00019-xx) for full details.
30
Installation Options
and
"Installing the Radio"
26.
Assembled
TM8100/TM8200 Installation Guide
© Tait Limited October 2012
Advertisement
Table of Contents
