Heat & Glo MEZZO-1000-AU Installation Manual page 49

Finishing - Non-Combustible Hearth CFT Fronts-In
side Fit
A non-combustible hearth may be installed in front of
the appliance only if the inside fit finishing method with
CFT doors is used.
1. Install trim ring.
2. Non-combustible hearth material may be placed up
to the bottom edge of the trim ring. The hearth may
be a maximum of 12 in. (305 mm) in depth.
TRIM RING
Figure 10.5 Finishing and Facing Materials - Inside Fit
15-3/4 in.
(400 mm)
Figure 10.6 Finished Opening Dimensions - Inside Fit Method
Heat & Glo • MEZZO-1000-AU, MEZZO-1300-AU, MEZZO-1300ST-AU, MEZZO-1600-AU Installation Manual • 2304-970 Rev. D • 3/15
CFT FRONTS ONLY
NON-COMBUSTIBLE HEARTH
12 in.
(305 mm)
MAX
39-1/8 in. (994 mm) MEZZO-1000-AU
51-1/8 in. (1299 mm) MEZZO-1300-AU, MEZZO-1300ST-AU
63-1/8 in. (1603 mm) MEZZO-1600-AU
FIREPLACE VIEWING AREA
-
47