Heat & Glo MEZZO-1000-AU Installation Manual page 47

1/2 in. (13 mm) THICK
WALL SHEATHING
FACTORY-INSTALLED
NON-COMBUSTIBLE
FINISHING MATERIAL
INSIDE FIT = 0-1 in. ( 0-25 mm) THICK
TEMPLATE BRACKET
Figure 10.3 Finishing Materials - See-Through Models
Decorative facing material thickness is measured
from the face of the factory-installed non-combustible
board. See Figure 10.2 and Figure 10.3.
The front for this appliance are compatible with non-
combustible materials. See Figure 10.2 and Figure 10.3.
Refer to Section 1.E and 1.F of this manual for
definitions and qualifications of non-combustible and
combustible materials.
Heat & Glo • MEZZO-1000-AU, MEZZO-1300-AU, MEZZO-1300ST-AU, MEZZO-1600-AU Installation Manual • 2304-970 Rev. D • 3/15 45
1/2 in. (13 mm)
NON-COMBUSTIBLE
BOARD
NON-COMBUSTIBLE
FINISHING MATERIAL
INSIDE FIT = 0-1 in. ( 0-25 mm)THICK
TEMPLATE BRACKET