Page 1
AUSTRALIAN RECOMMENDED MEZZO INSTALLATION INSTRUCTION FOR MODELS: MEZZO-1000-AU MEZZO-1300-AU MEZZO-1300ST-AU MEZZO-1600-AU 23/03/2017 Ver.1...
Page 2
MEZZO FIBRE CEMENT SHEETING INSTALLATION INSTRUCTION ONE PIECE 9mm FIBRE CEMENT SHEETING MEZZO HEAT BOARD TO SIT FLUSH WITH TIMBER FRAME TIMBER FRAME CEMENT SHEETING JOINT TO BE NEAR BOTTOM OF UNIT WHERE IT WILL BE COOLER 9mm FIBRE CEMENT SHEETING IMPORTANT: •...
MEZZO SEE THROUGH AUSTRALIAN FRAMING DIMENSIONS MEZZO SEE THROUGH FRAMING DIMENSIONS Variant Vent opening Opening height Opening depth Opening width MEZZO-1300ST-AU 1085 1580 23/03/2017 Ver.1...
Page 5
MEZZO SEE-THROUGH AUSTRALIAN SHEETING ATTACHMENT DETAIL Timber frame installed flush with the heat board material on the unit typical both sides. heat board material 9mm fibre cement sheeting DETAIL A Opening Opening 9mm fibre cement sheeting 9mm fibre cement sheeting under the unit 23/03/2017 Ver.1...
Page 6
MEZZO AUSTRALIAN SHEETING ATTACHMENT DETAIL Timber frame installed flush with the heat board material on the unit this side only. heat board material 9mm fibre cement sheeting DETAIL A 25mm air gap from rear of unit to timber framing with fibre cement sheeting.
Need help?
Do you have a question about the MEZZO-1000-AU and is the answer not in the manual?
Questions and answers